1) Enter a valid user code. 2) The ARMED and EXIT LED/LCD segment will now illuminate and the exit delay will commence. 3) The EXIT light flash rapidly for the last 10 seconds of the exit delay.
1) Enter a valid user code. 2) The ARMED light will extinguish when the panel is armed.
Manual bypass programming allows you to program the alarm system to ignore (deactivate) specified zones the next time the system is armed. For example, you may wish to bypass certain zones when workers are renovating part of your establishment. Please note that a Fire Zone cannot be bypassed. 1) Press the [BYPASS] button. 2) Enter your access code. 3) Select the zones that you wish to bypass by selecting the 2 digit zone number. 4) Press the [BYPASS] button again to save the bypassed zone entries. 5) The selected zones will be bypassed next time the system is armed.
Force arming allows you rapidly amr the system without waiting for all zones in the system to close. During force arming, a force zone is considered “deactivate” until it closes, after which the system will arm that zone. Force arming is commonly used when a motion detector is protecting the area occupied by a keypad. For example, when arming the system from within a force zone, the system will allow you to arm even if the zone is open and, the system will arm the zone once it closes. 1) Press the [ON] button. 2) The ARMED LED/LCD segment will illuminate and the exit delay will commence.
This method allows you to remain in the protected area while partially arming the system. Home zones are zones that are bypassed when partial arming. For example, when you go to sleep at night, doors and windows can be armed without arming other zones like motion detectors. 1) Press the [PARTIAL] button. 2) The BYPASSED LED/LCD segment will now illuminate.
Send
Fill out the form below or call us on 1300 658 118
